Deurmat op maat dierenprint

Measuring instructions

Measuring instructions for custom made fitted doormats

Measure the area where you want to place the made-to-measure doormat. Measure the length and width at several points, as the space may not be completely straight. Write down the measurements. Give us the largest measurement.
 
  1. If you have corners, always measure the widest width and the longest length. You can trim the corners to size later.
  2. Round the measurements up to the nearest whole centimeter.
  3. The prints are always horizontal unless otherwise specified.

 

It’s important to check whether the mat will be recessed INTO the floor or placed ON the floor.

meetinstructies-deurmat

The mat will be recessed INTO my floor

When the mat is placed in a recess, it is obviously important that the mat fits exactly.
 
Every custom product has a small production margin in its dimensions. As a result, the mat is not always exactly the right size. This is due to shrinkage that occurs during production. To prevent the mat from being too small, we enlarge the mat slightly to make room for the shrinkage. So you will receive the mat slightly larger than the size you passed on. This gives you a few mm margin to cut the mat to size yourself.
 
  • Order the size you need. (If in doubt, order a cm larger!)
  • The mat is not made to the mm. This one is just a little wider, you can easily cut the mat to size at home.
  • Corners can also be easily cut out of the mat.
 

The mat will be placed ON TOP OF my floor

Every custom product has a small shrinkage margin. However, this is negligible in a few mm. When the mat is placed ON the floor you won’t notice this.

  • Order the size you need.
  • Corners can also be easily trimmed from the mat if necessary.
  • Prefer a black vinyl edge for a finished look? No problem, just mention it in the comments section at checkout.

Cutting your doormat to size

Your doormat has been delivered and now you want to enjoy it as soon as possible. You have ordered the mat to size, yet it is to cut the mat to size.With these instructions, this is no problem for any handyman or handywoman.

  1. Double-check the area where the custom doormat will be placed. Measure both the length and width at several points, as the space may not be perfectly straight.

  2. Write down the measurements, including the sizes of the corners! It’s also helpful to make a quick sketch, so you know exactly which measurement corresponds to each section.

  3. Use a sharp utility knife or scissors. Work one corner at a time, and after each cut, check to ensure you’re still on track. Take your time to avoid mistakes.

  4. Shake off any loose fibers from the mat, and then place it in position.

Need advise?

Do you need help with ordering or selecting the right size? Contact our customer service, we’re happy to assist you!